Details zur Publikation

Kategorie Textpublikation
Referenztyp Zeitschriften
DOI 10.1016/S0165-2370(99)00051-0
Titel (primär) Surface and bulk chemistry of charcoal obtained by vacuum pyrolysis of bark: influence of feedstock moisture content
Autor Darmstadt, H.; Pantea, D.M.; Sümmchen, L.; Roland, U.; Roy, C.; Kaliaguine, S.
Quelle Journal of Analytical and Applied Pyrolysis
Erscheinungsjahr 2000
Department TUCHEM; SAN
Band/Volume 53
Heft 1
Seite von 1
Seite bis 17
Sprache englisch
Abstract Samples of maple bark and softwood bark with moisture contents ranging from 6 to 42 wt% were pyrolyzed under vacuum at a temperature of 775 K. Vacuum pyrolysis of maple bark yields approximately 30 wt% wood charcoal on an anhydrous basis. For softwood bark the charcoal yield is smaller (23–28 wt%). The charcoal yield of maple bark pyrolysis depended only slightly on the bark moisture. The surface and bulk chemistry development of the charcoals was studied by electron spectroscopy for chemical analysis (ESCA), secondary ion mass spectroscopy (SIMS) and Raman spectroscopy, respectively. With decreasing bark moisture the charcoal surface becomes more graphite-like, whereas the bark moisture had only a limited influence on the bulk structure. The high specific surface area of the charcoals at 200–300 m2/g makes these materials valuable feedstocks for the production of activated carbons.
dauerhafte UFZ-Verlinkung https://www.ufz.de/index.php?en=20939&ufzPublicationIdentifier=7072
Darmstadt, H., Pantea, D.M., Sümmchen, L., Roland, U., Roy, C., Kaliaguine, S. (2000):
Surface and bulk chemistry of charcoal obtained by vacuum pyrolysis of bark: influence of feedstock moisture content
J. Anal. Appl. Pyrolysis 53 (1), 1 - 17 10.1016/S0165-2370(99)00051-0